 |
 |
 |
 |
 |
 |
 |
|||
|
||||
|
|
|
|
|
|
|
|||
|
||||
          |
 -Print
Friendly Version Click HereInjection Molding Technology Seminar This seminar was like loading my brain
with an injection molding encyclopedia. John gave all the information that
everyone should know that works in plastics.
The extent to which John conveys his
genuine interest and total enthusiasm for the injection molding industry (and his
students) is remarkable and, frankly, quite inspirational. Now I have a better
understanding of how One of the best
instructors that combined science and practical application to the injection
molding process. John was very good at explaining topics, which kept the
training very interesting.
Bring your questions! Excellent course taught by one of the industry's most experienced
and seasoned professionals.
John is obviously tops in
the field of injection molding. I believe his expertise would benefit any individual in
the field. John has a great sense of humor
and a lot of energy. His presentation is clear and to the point. He has a very thorough
understanding of all aspects of injection molding: materials, molds, machinery,
processing, etc.
He has a unique way of
explaining things that make them crystal clear when before they made no sense.
Seminars don't
get much better and informative than this, and if you leave the course not knowing, it's
your fault. John's practical
experience in molding, mold design and mold-making, together with his theoretical
education on these subjects combine to make him one of the most credible and valuable
teachers I have been exposed to. It is refreshing to see
enthusiastic, intelligent, pro-active and exciting instructors, who truly care
about the injection molding business and the "hands-on" workers who
are responsible for making it work in the U. S. One word
"Energizing". I really enjoyed the course,
both John's are very passionate and excited about teaching Scientific Molding -
It makes the 4 days go by fast. The course was well
presented by both John K. and John B. They presented the information
so the average press operator/processor will get the message they are
putting out. I would like to thank both men for taking the time to teach
their principles. After 25 years of molding I
am walking away with the knowledge that I feel will make me an even better
molder and trouble shooter. John & John's seminar was
packed with so much relevant information, it couldn't possibly be absorbed
during one visit. It was so much fun, they should open a resort - "Molding
Land". Finally after 24 years of
working in the injection molding field, someone has been able to explain
scientifically why some of the processes work and some don't. I highly recommend
this program for anyone that makes machine adjustments and mold design
decisions. An excellent, up to
date, presentation that reduces the complicated injection molding process
down to digestible components. After 24 years in the industry, I understand
again how much more I need to know and this seminar will significantly change my
approach to my job. Thanks. Mr. Klees and Mr. Bozzelli
are very passionate about the topic of Injection Molding. Their knowledge of
the topic is overwhelming at times. I wish we could keep them here to direct
all of our molding processes.
Bring a bigger brain - at least
one with a lot of memory! John Klees'
seminars are incredible. He has an answer for every question asked. His
credibility is phenomenal as well. John Klees' enthusiasm
really keeps the seminar very interesting. This seminar helps me understand
several of the problems we deal with over and over again. I should be able to
apply what I have learned and pay back the cost of the seminar within a couple
weeks. Excellent presentation! I
received many new ideas on ways to approach problems in our mold development.
I also felt support for many of the decisions I have to make during tool
development. Class was enjoyable,
well delivered and not at a level or speed that couldn't be followed. John
took the time to answer every question in detail. A very
intense and informative seminar. In the past we knew what changes needed to be
made in the runner system to balance it. But not understanding why. Now we
understand how plastic flows in the runners. I can
honestly tell my boss we received MORE than we paid for when compared to other
seminars we have chosen. John shows
you that there is more than one way to attack a tough molding problem through
creative tool design. I highly recommend this course to anyone designing
Injection Mold Tooling to enrich your designs. Thanks John and Ali. I justified the time
and cost of this course by the end of the first morning. 24 hours of
edge of your seat mold building excitement. I learned more in seminar II &
III about what it really takes to build quality molds than I did in 4 years of
actually building them. Thanks John. If you know
someone who thinks that they know everything - send them to one of John's seminars. They
will return humbled and thankful.
John's hands on
experience is unbelievable, he can relate to problems and explain from personal
experiences to help solve problems. No matter how much
experience you have in the molding industry, there is a wealth of information to take with
you. I only wish I had
attended a seminar like this sooner. Many of my designs could have been much more simple,
better, and more maintenance free. Hot Runner Seminar If you run hot runners - both, operators and maintenance personnel must attend! John Bozzelli, Principal, Injection Molding Solutions, Midland, MI John's experience with real applications offers a perspective not available with typical seminars or found in text. Always an experience! Jeff Good, Sr. Engineering Specialist, Arrow International, Inc., Reading, PA Very
impressive and intense presentation. Nice and very knowledgeable presenter.
John Klees is an inspiration that knowledge is the key to success. If you are
dealing with Hot Runner molds, this seminar should be required with all involved. Even if
you are only dealing with hot sprue bushings, this seminar will pay for itself time and
time again! John Klees
conducts a superb Hot Runner seminar. He carefully explains what works and what
doesn't and backs up every position with hard engineering and excellent real
world examples. Incredibly
informative. This is the basis of mold design - not taught by anyone that I have seen in
14 years of mold design - the absolute best!! Design for Moldability Seminar Good refresher for the
experienced engineer. Great explanation of
plastic materials and their behavior during molding. Great seminar; movie
clips and parts/samples were very effective in explaining content. John's
'real life' experiences were very interesting and fit well into his lecture. John is the best in
the industry. His complete knowledge of polymer, part design, mold design and processing
is unparalleled.
This course really opened my eyes to the considerations that go into molding
plastics.
John presents an energetic
seminar which captures the audience with a mixture of real world examples and humor.
Highly recommended!! Fasten your seatbelts! Mr. Klees
takes you on an "evangelistic" ride through the world of plastics, plastics
manufacturing, and design for Moldibility. It
was a very worthwhile course! While the content of the course is somewhat
overwhelming, all participants were able to glean information in their area
of interest. Great job! Excellent!
Now know what designers are talking about! Most knowledgeable
of any instructor for a training course I have ever had. It was refreshing to have an
instructor with such a depth of understanding of scientific principles and who was not
just spouting rules of thumb.
John ties the
fundamentals of polymer physic to molding applications with specific examples of how the
product designers and molders can work to assure Moldibility.
Whether a
seasoned veteran needing a refresher or a beginning design engineer, this course will be
of great value.
Great delivery,
wealth of knowledge and experience, speaks with authority. This seminar is definitely not
a sleeper. Great visuals and samples. After hearing
John's presentation, you immediately start thinking about your past and future designs and
more importantly, how they will change! Presenter was very
enthusiastic in presenting material. He really knew his polymer chemistry and could give
practical tips on tool design! Wow!! The "need to know" on molding and mold design Just a note to let you know
our people are raving about your presentation. Thank you!!!!! Reminds you of things you
forgot as well as being highly technical. Very thought provoking. John Klees is the
"guru" in Injection Molding. He can explain the injection molding process better
than any other instructor in the business. John and Ali provide an
atmosphere which is very comfortable for the time involved with so much information to
take in. John does a very good job with limited time and no hesitation with an answer. John's insight into all
aspects of molding was very impressive, his ability to answer all questions and customize
the course material "on the fly" was extremely beneficial. If we use everything we
learned in this seminar - Watch out, Plastics Industry! Customized Programs
Superb!
This was the best seminar that I had ever attended. John has prompted me to
rethink many of our accepted practices. Excellent
seminar and extremely valuable.
John is a breath of fresh air. Breathing science and data into the black
magic world of injection molding. Engineering is the only way to be
successful in today's competitive world. Thanks for the refresher. Excellent
presentation of engineering principles applied to polymer molding applications. Mr. Klees was
tops. I wish he would publish a book because he is so full of knowledge. There is no way I
could absorb all of the information he gave in 8 hours. I've had Tobin training, Paulson
training, and have read lots of SPE injection molding books, but nothing was as near as
interesting and informative about cooling and heating in one setting as this energetic
John Klees seminar.
This seminar
was jam packed with tooling design and process knowledge. The presentation given by John
Klees was dynamic and well prepared. "Never a dull moment!" John Klees
speaks on plastic molding with all of the enthusiasm and vigor of Martin Luther King
speaking on human rights!
The course has
highlighted many common sense fundamentals which we may have either forgotten or skipped
over but are obvious after they have been explained clearly. |
HOME
| PUBLIC SEMINARS | IN-PLANT SEMINARS |
SEMINAR OUTLINES | ABOUT THE
INSTRUCTOR John Klees
Enterprise, Inc. - 125 Caldonia Drive - Candler, NC 28715 © 2000 Copyright,
John Klees Enterprise, Inc - All Rights Reserved |
Intense
and saturating.